GB/T 2189-1991 机床夹具零件及部件 回转压板
作者:标准资料网 时间:2024-05-27 11:32:08 浏览:9100
来源:标准资料网
基本信息
| 标准名称： | 机床夹具零件及部件 回转压板 |
| 中标分类： |
机械 >>
工艺装备 >>
一般卡具 |
| 替代情况： | 调整为JB/T 8010.15-1995 |
| 发布日期： | 1900-01-01 |
| 实施日期： | 1992-01-01 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 1900-01-01 |
| 出版日期： | 1900-01-01 |
| 页数： | 3页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 机械 工艺装备 一般卡具
【英文标准名称】:DesignofCold-FormedStainlessSteelStructuralMembers,Specificationsforthe
【原文标准名称】:冷成形不锈钢构件的设计规范
【标准号】:ANSI/ASCE8-1990
【标准状态】:作废
【国别】:美国
【发布日期】:1990
【实施或试行日期】:
【发布单位】:美国国家标准学会(ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:钢结构;设计;结构金属加工;不锈钢
【英文主题词】:design;steelstructures;stainlesssteels;structuralmetalwork
【摘要】:
【中国标准分类号】:Q73
【国际标准分类号】:91_080_10
【页数】:
【正文语种】:英语
Product Code:SAE AMS3694
Title:Aerodynamic Smoothing Compound, Flexible, -55 to +130Mdc (-65 to +270Mdf)
Issuing Committee:Ams G9 Aerospace Sealing Committee
Scope: This specification covers a two-component air-curing resin-base material in the form of a paste or putty, suitable for application by spatula or putty knife. Primarily to fill aircraft skin depressions to a maximum depth of 0.250 in. (6.25 mm) and be capable of being painted with subsequent specified coatings. These materials are meant for filling small holes, crevices, and gaps or for smoothing areas requiring thin layers of flexible material to produce the required smoothness on aerodynamic surfaces. Suitable for maintaining adhesion to surfaces subject to service temperatures from -55 degrees to +130 degrees C (-65 degrees to +270 degrees F).
Rationale: This specification covers a two-component air-curing resin-base material in the form of a paste or putty, suitable for application by spatula or putty knife. Primarily to fill aircraft skin depressions to a maximum depth of 0.250 in. (6.25 mm) and be capable of being painted with subsequent specified coatings. These materials are meant for filling small holes, crevices, and gaps or for smoothing areas requiring thin layers of flexible material to produce the required smoothness on aerodynamic surfaces. Suitable for maintaining adhesion to surfaces subject to service temperatures from -55 degrees to +130 degrees C (-65 degrees to +270 degrees F).
